SpectraPure® ZetaZorb® Sediment Pre-Filter Cartridge - 0.2 Micron (Absolute), 2.8 inch D x 10 inch L
The unique technology employed in the construction of the SpectraPure® ZetaZorb® sediment pre-filter enables the filter to hold five times the sediment of any other filter with minimal pressure drop. Think about it. That's 5x fewer filter changes, 5 x fewer service trips and 5x less volume of old filters disposed of in your local landfill.
With older filter technology, sediment pre-filters were incapable of blocking all fine sediments that could foul the down-stream carbon block pre-filter. A fouled carbon block pre-filter cannot trap chlorine, VOC's, solvents, humic, fulvic acids and other contaminants that cause odor and reduce expensive RO membrane lifespan and performance. The ZetaZorb® stops pass through sediment, which increases the life of the carbon block pre-filter by at least two times. We recommend changing this filter when a decrease in pressure is noticed.
FEATURES:
- 5x more dirt holding capacity than other sediment pre-filters
- 0.2 Micron absolute removal efficiency doubles the longevity of your carbon block pre-filter, which protects the heart of your RO system (the RO membrane) from pass through sediments.
- Significantly reduces membrane fouling.
- Operational costs are reduced significantly/
- Suggested Flow Rate gpm 4 (lpm) 15
- Maximum Flow Rate gpm 10 (lpm) 38
- Temperature Operating Range: 39-180°F (4-82°C)
- pH Range: 5 to 10
- Dimensions: 2.8" x 9.75"
- Interchangeable with BRS, AquaFX, Kent Marine, AWI, and most other residential or aquarium DI or RO/DI systems
SpectraPure Carbon Block Filter Cartridge - 0.5 micron (nominal), 2.8 inch D x 10 inch L
SpectraPure 0.5 Micron Carbon FIlters are manufactured with high purity carbon. Great performance in reducing sediments, Chlorine reduction, color, and pesticides. Decrease VOCs (volatile organic compounds) such as chloroform and petrochemicals as well.
- Filter Media: Acid-washed coconut-based carbon
- Micron: 0.5 Micron
- Greatly Reduces Taste and Odor
- High Chlorine Reduction
- Great Sediment Holding Capacity
- Outer Wrap and End Caps - Polypropylene
- NSF-42 approved and made of FDA-compliant materials.
- Temperature Rating: 40 - 125 degrees F
- Interchangeable with BRS, AquaFX, Kent Marine, AWI, and most other residential or aquarium DI or RO/DI systems
Note: Only 0.5 micron carbon block filters remove trihalomethanes, low levels of chloramine, pesticides, volatile organic chemicals and 99.95% of giardia and cryptosporidium cysts.
Mega MaxCap® DI Cartridge
The Mega MaxCap® DI Cartridge is SpectraPure’s newest addition to the MaxCap® DI series of specialty deionization cartridges.
Like the legacy MaxCap® cartridges, the new Mega MaxCap® functions as a roughing DI stage by removing the vast majority of residual ammonia, phosphates and other trace ionized impurities that have passed through a purification system’s RO membrane. This preprocessing improves RO water chemistry to the degree that the downstream mixed-bed and/or layered-bed DI resins in subsequent finishing stages will continue to perform optimally for far greater durations, processing 4x or more DI water by volume than otherwise possible.
The new Mega MaxCap® DI’s higher capacity and enhanced phosphate removal provides even greater overall cartridge life. The Mega MaxCap® processes even more water and extends the life of downstream finishing DI cartridges even better than its predecessor. The Mega MaxCap® DI should be used ahead of any color-indicating or non-indicating mixed-bed, SilicaBuster™, Enduro™ DI or other conventional mixed-bed DI finishing cartridges, to greatly extend cartridge life, thus requiring far fewer replacements over time. Enjoy consistently ultra-pure DI water and water production cost savings.
FEATURES:
- Standard twist top shell, 3 inch D x 10 inch L, fits in virtually all standard 10 inch filter housings
- Roughing DI cartridge designed to be placed ahead of a mixed-bed, SilicaBuster™ or other finishing DI stage
- Improved performance over the legacy MaxCap® DI resin formulation
- 3.5x the capacity of conventional mixed-bed and high silica removal cartridges
- Removes residual ammonia and ionized impurities from RO stream
- Improved phosphate removal and extended cartridge longevity over the legacy MaxCap® DI
- Interchangeable with Captive Purity's, Kent Marine's, AWI's, BRS's and most residential/aquarium RO or RO/DI systems and SpectraPure Eliminator Systems
Aluminized Mylar packaging eliminates DI cartridge degradation Note: Deionization cartridge life is greatly reduced when operated on low pH waters, or water with high CO2 (carbon dioxide) levels. Exact cartridge life will vary greatly with pH, carbon dioxide levels and TDS etc., in your RO water or the feed water supplying the RO system. Aeration or degasification of RO product water is recommended for such waters for removal of carbon dioxide.
PLEASE NOTE: SOME RESINS DISCHARGE A STRONG ODOR AND ARE BEST HANDLED IN WELL VENTILATED AREAS WHENEVER POSSIBLE
Mega MaxCap® DI Enduro™ DI High Performance CartridgeCartridge
The SpectraPure® Enduro™ DI is the latest addition to SpectraPure®’s line of High Performance and Specialty DI cartridges. With a longer lifespan than the legacy mixed-bed or SilicaBuster™ DI cartridges, the Enduro™ DI spends more time producing water at ultra pure levels (18.2 megohms) before dropping off when resins become depleted.
Typical mixed-bed DI cartridges can produce ultra-pure water initially, but after a short period of usage the resin’s maximum removal levels start to diminish, until with continued usage, purity will finally trend below acceptable levels and the cartridge is considered “exhausted”. The Enduro™ DI performance curve is flatter at the top, not dropping downward until much later in the cartridge's life, spending the majority of its lifespan at maximum removal levels and with very little time at reduced levels prior to cartridge depletion.
When used in a multi-stage DI system and configured as a polishing DI stage placed downstream from a MaxCap® or Mega MaxCap® DI roughing stage, the life of the Enduro™ DI increases dramatically. This translates into cost savings with fewer replacement cartridges to buy and more ultra high-purity water production between changes.
FEATURES:
- Standard twist top shell, 3 inch D x 10 inch L, fits in virtually all standard 10 inch filter housings
- Designed to produce ultra high purity (18.2 megohms) deionized water for extended periods
- Maintains ultra high purity water production characteristics well through the life of the cartridge
- Optimized for use as a final polishing DI stage when used in a multi-stage DI configuration
- Removes all traces of silica, nitrates, phosphates and ionized impurities
- Extended cartridge longevity over the legacy SilicaBuster DI or conventional mixed-bed cartridges
- Interchangeable with Captive Purity's, Kent Marine's, AWI's, BRS's and most residential/aquarium RO or RO/DI systems and SpectraPure Eliminator Systems
Aluminized Mylar packaging eliminates DI cartridge degradation Note: Deionization cartridge life is greatly reduced when operated on low pH waters, or water with high CO2 (carbon dioxide) levels. Exact cartridge life will vary greatly with pH, carbon dioxide levels and TDS etc., in your RO water or the feed water supplying the RO system. Aeration or degasification of RO product water is recommended for such waters for removal of carbon dioxide.
PLEASE NOTE: SOME RESINS DISCHARGE A STRONG ODOR AND ARE BEST HANDLED IN WELL VENTILATED AREAS WHENEVER POSSIBLE