SpectraPure® MaxCap® RODI System Cartridge Replacement Kit

SKU: FK-MCRODI-HCZZ

Price:
$139.99

SpectraPure® ZetaZorb® Sediment Pre-Filter Cartridge - 0.2 Micron (Absolute), 2.8 inch D x 10 inch L 

The unique technology employed in the construction of the SpectraPure® ZetaZorb® sediment pre-filter enables the filter to hold five times the sediment of any other filter with minimal pressure drop. Think about it. That's 5x fewer filter changes, 5 x fewer service trips and 5x less volume of old filters disposed of in your local landfill.

With older filter technology, sediment pre-filters were incapable of blocking all fine sediments that could foul the down-stream carbon block pre-filter. A fouled carbon block pre-filter cannot trap chlorine, VOC's, solvents, humic, fulvic acids and other contaminants that cause odor and reduce expensive RO membrane lifespan and performance. The ZetaZorb® stops pass through sediment, which increases the life of the carbon block pre-filter by at least two times.  We recommend changing this filter when a decrease in pressure is noticed.

FEATURES:

  • 5x more dirt holding capacity than other sediment pre-filters
  • 0.2 Micron absolute removal efficiency doubles the longevity of your carbon block pre-filter, which protects the heart of your RO system (the RO membrane) from pass through sediments.
  • Significantly reduces membrane fouling.
  • Operational costs are reduced significantly/
  • Suggested Flow Rate gpm 4 (lpm) 15
  • Maximum Flow Rate gpm 10 (lpm) 38
  • Temperature Operating Range: 39-180°F (4-82°C)
  • pH Range: 5 to 10
  • Dimensions: 2.8" x 9.75"
  • Interchangeable with BRS, AquaFX, Kent Marine, AWI, and most other residential or aquarium DI or RO/DI systems

 

SpectraPure Carbon Block Filter Cartridge - 0.5 micron (nominal), 2.8 inch D x 10 inch L

SpectraPure 0.5 Micron Carbon FIlters are manufactured with high purity carbon. Great performance in reducing sediments, Chlorine reduction, color, and pesticides. Decrease VOCs (volatile organic compounds) such as chloroform and petrochemicals as well. 

  • Filter Media: Acid-washed coconut-based carbon
  • Micron: 0.5 Micron
  • Greatly Reduces Taste and Odor
  • High Chlorine Reduction
  • Great Sediment Holding Capacity
  • Outer Wrap and End Caps - Polypropylene 
  • NSF-42 approved and made of FDA-compliant materials. 
  • Temperature Rating: 40 - 125 degrees F
  • Interchangeable with BRS, AquaFX, Kent Marine, AWI, and most other residential or aquarium DI or RO/DI systems

Note:  Only 0.5 micron carbon block filters remove trihalomethanes, low levels of chloramine, pesticides, volatile organic chemicals and 99.95% of giardia and cryptosporidium cysts.

 

 

MaxCap® High Capacity DI Cartridge - 10"

Super DI MaxCap® DI Cartridge (Non-Indicating) - High Capacity 10 inch Shell, 3 inch D x 10 inch L

FEATURES:

SpectraPure’s MaxCap® DI Cartridges are the heart of the MaxCap® series of products. When placed ahead of your existing DI cartridge, the life of your downstream DI cartridges will increase by 4x or more - lower your DI production costs by over half. Now Super DI MaxCap® DI cartridges have even greater capacity than our standard shell cartridges! 

  • Now with 33% more capacity than our standard MaxCap® DI cartridge.
  • 4x the removal efficiency of conventional mixed-bed and high silica cartridges
  • Proprietary high flow, low pressure drop cartridge produces more GPD!
  • Designed to be used in front of a mixed-bed or SilicaBuster™ DI cartridge
  • Removes most ionized impurities
  • Removes ammonia that is left by water sources that contain chloramines.
  • Super DI cartridges fit inside both standard and slimline 10in filter housings

Aluminized Mylar packaging eliminates DI cartridge degradation Note: Deionization cartridge life is greatly reduced when operated on low pH waters, or water with high CO2 (carbon dioxide) levels. Exact cartridge life will vary greatly with pH, carbon dioxide levels and TDS etc., in your RO water or the feed water supplying the RO system. Aeration or degasification of RO product water is recommended for such waters for removal of carbon dioxide.

PLEASE NOTE: SOME RESINS DISCHARGE A STRONG ODOR AND ARE BEST HANDLED IN WELL VENTILATED AREAS WHENEVER POSSIBLE

 

 

SilicaBuster™ High Capacity DI Cartridge - Non-Color-Indicating - 10"

SpectraPure® SilicaBuster™ Super Multi-Layer DI Cartridge - High Capacity 10in Shell, 3 inch D x 10 inch L

FEATURES:

SpectraPure® SilicaBuster™ mixed-bed multi-layer deionization cartridges are fabricated with semiconductor grade resins for highest possible purity water. They are capable of producing 18 megohm resistivity water. They are the first deionization cartridges designed to reduce silica, nitrates and phosphate levels in the low ppb range. These newly formulated cartridges far exceed the performance of previous cartridges, offering enhanced contaminant removal, longer life and higher purity. Now Super DI SilicaBuster™ DI cartridges have even greater capacity than our standard shell cartridges! The ion exchange resins in this cartridge are not dyed for color-indication and require resistivity or silica monitoring to determine exhaustion.

  • Now with 33% more capacity than our standard SilicaBuster™ DI cartridge
  • For ultra high purity water (18 megohms resistivity)
  • Enhanced silica removal
  • Highest silica, nitrate, phosphate and heavy metal removal available
  • Non color-indicating semiconductor grade resins for highest purity and lowest TOC levels
  • Optimized for post RO or post distillation filtration
  • Highest capacity compared to other similar size cartridges
  • Interchangeable with Captive Purity's, Kent Marine's, AWI's, BRS's and most residential/aquarium RO or RO/DI systems and SpectraPure Eliminator Systems


Aluminized Mylar packaging eliminates DI cartridge degradation Note: Deionization cartridge life is greatly reduced when operated on low pH waters, or water with high CO2 (carbon dioxide) levels. Exact cartridge life will vary greatly with pH, carbon dioxide levels and TDS etc., in your RO water or the feed water supplying the RO system. Aeration or degasification of RO product water is recommended for such waters for removal of carbon dioxide.

PLEASE NOTE: SOME RESINS DISCHARGE A STRONG ODOR AND ARE BEST HANDLED IN WELL VENTILATED AREAS WHENEVER POSSIBLE

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Bob Ferris
Excellent Service

Got exactly what I ordered, and shipping was extremely fast. Great experience!!!

D
David Coleman
Replacement filters

They work as the should

B
Brad Taber
Best RO/DI for Reefing

Absolutely the best customer service bar none! Very helpful and courteous staff who are always eager to assist. You cannot wrong with this company's products!

V
Vince Wilson
Replacement filters

Simply the best!

V
Vince Wilson
To/Di replacement filters

Simply the best!

Recently viewed